WIKI資訊
Fixture Testing. Fixture testing consisted of vacuum, heating, pressure, and microwave testing.Pressure Testing. Initial pressure testing of thin sapphire windows in a fixture was conducted on both halves of the standard fixture that had been fabricated with thin windows in Phase I. The sapphire windows were 76 mm diameter, 0.325 mm thick that were matt finished on one side and epi-polished on the o......閱讀全文
through a boundary conductance, h, on faces at z = +/- L.is controlled by the parameter hL/k, the Biot Number, where k is the thermal conductivity
Summary of ResultsThe important objective of Phase II research was achieved: to fabricate and test a prototype high power sapphire microwave windo